+- Unfortunately, the MRIQuestions.com forum became unmanageable due to spam attacks. I recommend an alternative resource: www.imagingQA.com (http://mriquestions.com/forum)
+-- Forum: Magnets & Scanners (/forumdisplay.php?fid=4)
+--- Forum: Gradients and Coils (/forumdisplay.php?fid=15)
+--- Thread: RF Transmit Path (/showthread.php?tid=10209)
RF Transmit Path - jobinshere@gmail.com - 04-30-2016 02:21 PM
Hi,
1.Can anyone explain what the need of Hybrid in an MR, ie the spliting of RF with 0 and 90 degree phase difference.
2.What will will the difference without that.
3. Usually the RF coils will be reeving the MR signals as milli voltage and how the conversion to the grey scale is happening in relation to the voltages
Regards,
Jobins
RE: RF Transmit Path - aelster - 05-30-2016 05:17 PM
I think the answers to your first two questions are already fairly well explained on the following page:
http://mriquestions.com/lp-vs-cp-quadrature.html
Your third question (conversion of RF channel voltages to gray scale) is not so simple. Basically, the voltages recorded represent the MR signal (plus noise) from the entire image which is modulated on top of a carrier wave at the Larmor frequency. This must be "decoded" through Fourier transformation and other methods to sort out which signal is coming from where in the body. The final magnitude of this processed data is typically displayed on a pixel by pixel basis in gray scale from black (low signal) to white (high signal).