Post Reply 
Magnetic field of a MRI...
01-16-2016, 08:52 PM
Post: #1
Magnetic field of a MRI...
Hello,
As you may know the magnetic field intensity of a MRI is very high so that if it is not controlled it can attract a car from outside.
So,is it possible to reverse the magnetic field of a MRI for a non-medical
application so that it repels the outside objects very strongly?

And how can do that?

Thanks,Huh
Find all posts by this user
Quote this message in a reply
01-20-2016, 04:08 AM
Post: #2
RE: Magnetic field of a MRI...
No, not really - but if anyone can show me wrong I am interested. I wouldn't worry about pulling in a Buick though. But anyway - a metal object like a car in the earth's magnetic field is full of tiny magnetic vectors that are in disarray. They add up to practically nothing. When they are in a significant magnetic field, all of a sudden, their direction becomes important - going with the magnetic field is lower in energy than going against it. So, now, our system containing the magnetic field and our metal object is lower in energy than if they were apart. Systems seeking a lower energy is a concept in the field known as thermodynamics. Our system can reduce its energy further if the metal object can move into a stronger part of the field - allowing even more of the little vectors to line up. Now to get a system to do the opposite - to have a field which shoots metals with away to reduce energy, is much less likely. Forces that reduce the energy of a system have a tendency to be attractive. So for example, this is why when things cool down - they tend to go from gases, then to liquids, then to solids. Not usually the other way around. So you might be able to build such a device that repels metals - but it's going to cost you energy. When a metal gets pulled into a magnetic field, we can think of this as a relaxation - a "downhill" process. Going the other way, though, and you'll at least have to put energy into our system. One easy way to imagine the energy we'd have to put into the system is to imagine the work it would take to pull a metal object out of the field!
Find all posts by this user
Quote this message in a reply
05-19-2016, 06:46 PM
Post: #3
RE: Magnetic field of a MRI...
(01-16-2016 08:52 PM)boby Wrote:  
So,is it possible to reverse the magnetic field of a MRI for a non-medical
application so that it repels the outside objects very strongly?

And how can do that?

No, ist's not possible. You are thinking about a magnetic monopole (attraction or repulsion), but a magnet is always (as far as we know) a dipole, i.e. attracting on one end and repulsing on the other end.
This interaction is only valid for other magnets, for magnetic materials (iron,.. =car) you have to unterstand that the magnetic material (iron) in a magnetic field is being magnetized and thereby becoming a magnet as long as it is in the magnetic field. The orientation of the magnetized material is dependent on its properties (para-, dia- or ferromagnetic).

So if you build a car from a diamagnetic material it will always be repulsed by the MRI-field, a car made out of para- or ferromagnetic material will always be attracted by it.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)